The device is mainly used to monitor the temperature and humidity data of food, medicine, chemical products and other products during storage and transportation. It is widely used in all links of warehousing and logistics cold-chain, such as reefer containers, refrigerated trucks, refrigerated distribution boxes, cold storage laboratory, etc. Compact and light, it is economical to use. After the recording is completed, it is inserted into the computer without any driver and automatically generates reports.
Ø Designed to be Multi-use
Ø Temperature & Humidity measurement and recording
Ø Wide measuring range,high accuracy and large data memory
Ø Statistics available on LCD screen
Ø No software needed to retrieve data
Ø Automatically generates PDF report and CSV file
Ø Programmable software for logging parameters,alarms,and start delay
||℃ or ℉
||Humidity 0%~100%RH, Temp -30℃~60℃
||0.1%RH typically, 0.1℃
||Delayed or Push-To-Start Logging
||10 seconds to 18 hours adjustable [Default:10 mins]
||Programmable (0~254 mins) [Default:30 mins]
||Programmable (0~960 mins) [Default:10 mins]
||Programmable high or low alarm limit for each channel [Default:<2℃ or >8℃, <40%RH or >80%RH]
|Shelf Life / Battery
||Typically 1 Year ;CR2032 3.0V Lithium Battery (Depending on Sampling Rate and Environment)
||Simultaneously generate PDF report and CSV files
||UTC +0:00 (Default)
LED Indicator Description
||Short press the button
||The “OK” ( green light) and the “Alarm” (red light) will flash simultaneously.
During the recording process, the device will automatically flash every 10s.
If the “OK”(green light) flashes every 10s, it means that the device is not over temperature/humidity during the recording process;
If the “Alarm” (red light) flashes every 10s, it shows the over temperature/humidity during the recording process.
Note: As long as over-temperature is found during the recording process, the “OK” will no longer flash.
||No press the button
||The “OK” (green light) and “Alarm”(red light) are not flashed.
|Short press the button
||The “OK” (green light) flashes, indicating that the temperature has not been over during the recording process.
|The “Alarm” ( red light) flashes, indicating over-temperature during the recording process.